Capitors coated with Resicoat powder

Electronic components

Electronic components like capacitors, resistors and hybrids are used in electrical devices that operate by controlling the flow of electrons or other electrically charged particles in devices such as thermionic valves and semiconductors.

Resicoat epoxy powders are lasermarkable, depending on the product and meet UL 94 (V-0). electronic components are coated in a fluidized bed.




Typical technical data for the encapsulation of electronic components

Powder properties:

Gel time at 160° C (ISO 8130-6) 50 – 90 sec.
Density (ISO 8130-2) 1.4 – 1.7 g/cm³
Kofler > 60° C
Storage stability 4 months ≤ 6° C


Coating values:

Curing cycle 90 min., 140° C
Thermal expansion coefficient 3 x 10-5/K
Cut through temperature > 100° C

For further information on specific details please contact us at

The following 2 coatings serie(s) is/are suitable for Electronic components